ProPave Grout – Natural Cashmere

This high performance jointing grout is specially formulated for external tiling. It comes in four neutral colours which combine perfectly with all manner of porcelain, natural stone and granite pavers.

Perfect for use with 20mm porcelain, this grout will fill joints from 3 to 20 mm in width.

✔ Use in any weather, all year round
✔ Suitable for domestic and light commercial areas
✔ Colour shield technology offers a more vibrant finish
✔ Can be walked over in 24 – 48 hours

This grout is the final stage of our ProPave External Tiling System, which also consists of Slurry Primer and ProPave Mortar.

How to use

ProPave grout can be applied in two different ways, depending on whether the base below the tiles is permeable or impermeable.

Permeable Bases – ProPave grout should be applied using the ‘wet’ method, where the tiles are hosed down with plenty of water before and during grouting. The grout will cure once all water has drained, so it is vital that the base is permeable and water can drain freely.

This is the most common application method for patios and terraces.

Impermeable Bases – ProPave grout should be applied using the ‘dry’ method, where minimal water is used as it can’t drain freely. Before grouting, gently wet the tile surface with a mist of water. Pour ProPave into the joints and compress using a pointing trowel and iron until a suitable level is achieved.

Coverage

This 15kg tub will cover 8 – 9.5 m2 based on using a 8mm joint that’s 25mm deep, with a tile measuring 45 x 45 cm.